TANDBERG TT1260 Reference Manual page 138

Technical Specification
B.10.2 D.C. Supply Input (-48 Vdc Version)
NOTES...
1. Only models TT1260/CIBAS/48 and TT1260/DIRBAS/48 use a d.c. power supply.
2. Ensure correct polarity is maintained.
3. The unit must have a protective earth.
Table B.47: D.C. Power Supply Specification
Item
Rated voltage
Rated current
Input connector
Fuse
Fuse type
Fuse current rating
Power consumption
B.11 Cable Types
The signal cable types (or similar) in Table B.48 are those recommended by TANDBERG
Television in order to maintain product EMC compliance.
Table B.48: Suitable Signal Cable Types
Signal Type
RS-232/RS-422 Data Out
Alarm Relay
ASI/HDSDI Out 1 and 2
ASI/SMPTE 310 In
Frame Sync
Ethernet (100BaseT)
Audio 1 and 2
Video Out
Page B-28
Specification
For connection to –48 Vdc supplies only.
(PSU input tolerance –40 to –60 Vdc). Correct polarity must always be observed.
2 A
Terminal block
Fuse in –48 Vdc connector at rear of unit.
Bussmann S505
Littelfuse 215
5x20mm time delay (T) 1500A breaking capacity (HBC)
IEC/EN 60127-2 Sheet 5
5 A 250 V T HBC
45 W typical (NO options fitted)
180 W maximum
Connector Cable
9-way D-type Male Belden 8162 CM 2PR24 shielded E108998 (typical)
9-way D-type Male Belden 8162 CM 2PR24 shielded E108998 (typical)
BNC Canford Audio BBC 1/3 PSF (type 2 video cable)
BNC Canford Audio BBC 1/3 PSF (type 2 video cable)
BNC Canford Audio BBC 1/3 PSF (type 2 video cable)
RJ-45 CAT 5E Data Cable S-FTP
9-way D-type Male to XLR Canford Audio Cable DST 110 Ω
15-way D-type Male Five-way screened Haurtian computer cable EL164535 'D'
Reference Guide: TT1260 Contribution Receiver
ST.RE.E10100.3