TANDBERG TT1260 Reference Manual page 157

Menu #
2.5.4
2.5.5
2.5.6
2.5.7
2.5.8
2.5.9
2.6
2.6.1
2.6.2
2.6.3
2.6.4
2.6.5
2.6.6
2.6.7
2.6.8
2.6.9
2.7
2.8
2.9
When a DVB-S/ASI/IF/C option is fitted, input 4 provides different menu options as detailed in
Table C.13.
Reference Guide: TT1260 Contribution Receiver
ST.RE.E10100.3
Display Title: Input
XXXX XXXX
ROLL OFF VV
SPECTRUM SENSE WW
SEARCH RANGE WW
CONSTELLATION MODE
LNB POWER YY
LNB 22 kHz ZZ
LNB FREQUENCY
XXXXX.X MHz
SATELLITE FREQUENCY
XXXXX.X MHz
SYMBOL RATE
XX.XXXXXX Msymb/s
MODULATION FEC
XXXX XXXX
ROLL OFF VV
SPECTRUM SENSE WW
SEARCH RANGE WW
CONSTELLATION MODE
LNB POWER YY
LNB 22 kHz ZZ
HARDWARE NUMBER XX
HARDWARE VERSION XX
FIRMWARE VERSION XX
Description
valid values of the currently selected modulation type. For AUTO
FEC, the Receiver searches for and locks to the correct FEC rate
for the received carrier.
VV is the spectral roll off (35%, 25%, 20%) for Source 3
WW is the spectrum sense (NORMAL, INVERTED or AUTO) for
Source 3
WW is the search range in kHz for Source 3
Hardware option ASI/IS/C (OPTION NOT FITTED if not fitted) for
Source 3
YY is the LNB power (ON, OFF or BOOSTED) for Source 3
ZZ is the Low Noise Block (ENABLE or DISABLE) for Source 3
Sets the LNB frequency for Source 4. XXXXX.X is the LNB
frequency in MHz.
Sets the Satellite frequency for Source 4. XXXXX.X is the Satellite
frequency in MHz.
Sets the symbol rate for Source 4. XX.XXXXXX is the symbol rate
in Msymb/s.
XXXX sets the modulation type (QPSK) and XXXX the FEC (1/2,
2/3, 3/4, 5/6, 7/8) for Source 4. The FEC selection is limited to the
valid values of the currently selected modulation type. For AUTO
FEC, the Receiver searches for and locks to the correct FEC rate
for the received carrier.
VV is the spectral roll off (35%, 25%, 20%) for Source 4
WW is the spectrum sense (NORMAL, INVERTED or AUTO) for
Source 4
WW is the search range in kHz for Source 4
Hardware option ASI/IS/C (OPTION NOT FITTED if not fitted) for
Source 4
YY is the LNB power (ON, OFF or BOOSTED) for Source 4
ZZ is the Low Noise Block (ENABLE or DISABLE) for Source 4
xx is the hardware number for the input card
xx is the hardware version for the input card
xx is the firmware version for the input card
Menus
Page C-15