Audio 1 Menu (Menu 3.2; Audio 2 Menu (Menu 3.3 - TANDBERG TT1260 Reference Manual

C.6.3

Audio 1 Menu (Menu 3.2)

The Audio 1 signal status submenu contains information about the audio format and status of
the currently decoded audio stream on the primary audio output.
Table C.17: Audio 1 Menu
Menu #
3.2
3.2.1
3.2.2
3.2.3
3.2.4
3.2.5
3.2.6
3.2.7
3.2.8
C.6.4

Audio 2 Menu (Menu 3.3)

The Audio 2 signal status submenu contains information about the audio format and status of
the currently decoded audio stream on the secondary audio output.
Table C.18: Audio 2 Menu
Menu #
3.3
3.3.1
3.3.2
3.3.3
3.3.4
Reference Guide: TT1260 Contribution Receiver
ST.RE.E10100.3
Display Title: AUDIO 01
XX STREAMS PID YYYY
WWWW WWWW W VVV ZZZZ
SAMPLING RATE XX.X kHz
BITRATE YYY kbit/s
DELAY ADJUSTMENT
XXX.X ms
DIGITAL OUTPUT XXXXX
ROUTING YYYYYY
CLIPPING LEVEL XX dB
AC-3 DOWNMIX METHOD
XXXXXXXXXXXXX
ATTENUATION
XXXX
PPM -24 -6 0
∞
- dB XXXXXXXXXXXXXX
PEAK -24 -6 0
∞
- dB XXXXXXXXXXXXXX
Display Title: AUDIO 02
XX STREAMS PID YYYY
WWWW WWWW W VVV ZZZZ
SAMPLING RATE XX.X kHz
BITRATE YYY kbit/s
DELAY ADJUSTMENT
XXX.X ms
DIGITAL OUTPUT XXXXX
ROUTING YYYYYY
CLIPPING LEVEL XX dB
Description
XX displays the number of audio streams present
YYYY displays the currently selected audio1 PID
ZZZZ displays the stream status (OK, STOP, FAIL)
VVV displays the audio layer (MUS, LIN, DD)
WWWWWWW displays the audio language
XX.X displays the audio 1 sample rate
YY displays the audio 1 bitrate
XXX.X is the audio 1 decoding delay (range +/- 0 to 49ms)
XXXXX is the editable audio 1 digital output format (AES3 OR AC-3)
YYYYYY is the editable audio 1 output routing (STEREO, MIXED TO
BOTH, LEFT TO BOTH, RIGHT TO BOTH)
XX is the editable audio 1 clipping value (12 – 24 dB)
XXXXXXXXXXXXX is the editable Dolby Digital AC-3 downmix
parameter (SURROUND STEREO, CONVENTIONAL STEREO)
XXXX is the editable attenuation level (0 to 24 dB in 2 dB steps,
OPTION NOT FITTED, if not fitted)
XXXXXXXXXXXXXX displays a bargraph of the current audio 1 level,
updated once per second - the Peak Program Meter.
XXXXXXXXXXXXXX displays a bargraph of the highest detected audio
1 level since reset of the infinite peak hold (available via edit key),
updated once per second.
Description
XX displays the number of audio streams present
YYYY displays the currently selected audio 2 PID
ZZZZ displays the stream status (OK, STOP, FAIL)
VVV displays the audio layer (MUS, LIN, DD)
WWWWWWW displays the audio language
XX.X is the audio 2 sample rate
YY is the audio 2 bitrate
XXX.X is the audio 2 decoding delay (range +/- 0 to 49ms)
XXXXX is the editable audio 2 digital output format (AES3 OR AC-3)
YYYYYY is the editable audio 2 output routing (STEREO, MIXED TO
BOTH, LEFT TO BOTH, RIGHT TO BOTH)
XX is the editable audio 2 clipping value (12 – 24 dB)
Menus
Page C-19