Table C.24: Video Signal Status Menu
Display title: SIG: VIDEO
Hsize
Vsize
Eff. Rate
Format
Pict. Rate
Audio Signal Status Menu
The audio signal status submenu contains information about the audio
format and quality, of the currently decoded audio stream on the primary
output.
Menu path: Main>Status>Signal>Audio
Table C.25: Audio Signal Status Menu
Display title: SIG: AUDIO
Coding
Mode
Rate (kbit/s)
Smpl
Prot
Audio2 Signal Status Menu
The audio2 signal status submenu contains information about the audio
format and quality, of the currently decoded audio stream on the
secondary audio output.
Menu path: Main>Status>Signal>Audio2
Table C.26: Audio2 Signal Status Menu
Display title: SIG: AUDIO2
Coding
Mode
Rate (kbit/s)
Smpl
Prot
PTS Status Menu
The PTS status menu display the current status of the utilisation of video
and audio buffers, as well as the offset between the actual presentation of
the components, compared to the ideal presentation time.
Menu path: Main>Status>Signal>PTS
Instruction Manual: TT1220 Professional Receivers and Decoders
ST.TM.TT1220.4
Description
Display the horizontal resolution of the video
Display the Vertical resolution of the video
Shows the effective bit-rate of the video component in 188 byte
packet size
Shows the aspect ratio (4:3 or 16:9) of the video.
Displays the number of pictures per second being displayed, usually
25 Hz or 30 Hz.
Description
Display the audio coding model, as layer I, layer II or AC-3.
Shows the modulation mode reported used in the encoder. Mono, Dual mono, Stereo or
Joint Stereo is displayed depending on the input.
Shows the bit-rate, in kilobits per second, that the audio was coded.
Shows the sampling rate, usually 32, 44.1 or 48 kHz
Informs if protection bits are present for the currently decoded audio stream.
Description
Display the audio coding model, as layer I, layer II or AC-3.
Shows the modulation mode reported used in the encoder. Mono, Dual mono, Stereo or
Joint Stereo is displayed depending on the input.
Shows the bit-rate, in kilobits per second, that the audio was coded.
Shows the sampling rate, usually 32, 44.1 or 48 kHz
Informs if protection bits are present for the currently decoded audio stream.
Front Panel LCD Menus
Page C-17