Table of Contents
Advertisement
2.5
Hold-down Clamp
The hold-down clamp protects all the cards from vibration and shock. After installing
all the cards, re-fasten the hold-down clamp. Please refer to the following steps.
1.
After plugging in the CPU card and add-on cards, please insert the rubber cush-
ions provided into the notches of the hold-down clamp, and adjust them to the
placement of the cards. The cushions offer these cards the protection against
shock and vibration.
2.
Put the hold-down clamp back into its original position.
3.
Secure the hold-down clamp to the chassis with the four screws.
ACP-5260 User Manual
Figure 2.6: Installing hold-down clamp
10
Advertisement
Table of Contents
