2.1.2
The Rear Panel Includes:
1.
Three high-speed cooling fans in the middle, and two blowers on the rear side
2.
Backplane
3.
Add-on cards
4.
Thermal sensor
5.
Alarm board
6.
Hold-down clamp and blower brackets
2.2
Removing the Chassis Covers
There are dual top covers for ACP-5260, top front cover and top rear cover. Both are
fixed to the chassis with four screws, two on each side. Please refer to Figure 2.2 &
Figure 2.3 and proceed as follows.
1.
Detach the four screws on both sides.
2.
Remove the top cover.
Figure 2.2: Removing the top front cover
Figure 2.3: Removing the top rear cover
7
ACP-5260 User Manual