Table of Contents
Advertisement
4 Microswitches
Slot 1 - PCI device: serial bus controller
(Bus: 0, Device: 10, Function: 2)
(Vendor: 0x1131, Device: 0x1562)
(Subs. Vendor: 0x5444, Subs. Device: 0x2800)
Slot 2 - PCI device: Ethernet controller
(Bus: 0, Device: 29, Function: 0)
(Vendor: 0x168C, Device: 0x0013)
(Subs. Vendor: 0x185F, Subs. Device: 0x1012)
Current production date: 09 21
Current software license: 20 12
S/N: 682/00100
BIOS MAC Add: 00-a0-26-c8-00-64
>>
........
TRYING APP CODE DUMP
(CONFIGURED) APPCODE1.BIN ver.: 0.10.7.32 0.0.0.0 ......
...........................................................
...........................................................
...................
APP DATA DUMP.......................................................
Running application
Default configuration used
Parsing text mode configuration ...
Configuration parsed
Initializing
Press any key to get started
On reaching this point, you can set micro-switch '5' in the OFF position (you don't have to power off the device). This
way, the saved configuration will run next time you restart the device. Also, bear in mind that the device configuration
is ignored on start up but it is not deleted.
14
Teldat S.A.
Teldat H2 RAIL Lite
Advertisement
Table of Contents
Need help?
Do you have a question about the H2 RAIL Lite and is the answer not in the manual?
Questions and answers