Activate Or Deactivate The Man-Down Or No-Movement Alarms; Man-Down And No-Movement Indication - ASCOM Myco User Manual

User Manual
Ascom Myco Wi-Fi and Cellular Smartphone
9.2.1

Activate or deactivate the Man-down or No-movement alarms

NOTE: The Personal security app can be hidden on the handset by the system administrator.
If the app is hidden, the alarms cannot be activated or deactivated from the handset.
1 Tap the "Personal security" app
2 Tap:
• "Man down tracking" to activate/deactivate the Man-down alarm.
• "No movement tracking" to activate/deactivate the No-movement alarm.
TIP: If not hidden, the Personal security app can also be reached through the notification
drawer when Man-down or No-movement tracking is activated.
An active Man-down alarm tracking is indicated with
movement is indicated with .
The Man-down and No-movement alarms are automatically deactivated while the handset
is placed in a Charging Rack.
9.2.2

Man-down and No-movement indication

When a Man-down or No-movement situation has been detected, the handset enters a
warning phase (usually seven seconds long). During the warning phase, the handset alerts
with:
• beep and vibrator signals
• an orange LED flash
• " / Warning..." on the top display
• a warning message popup on the main display (see
Figure 23. Man-down warning message popup on a locked handset with PIN or
Figure 24. Man-down warning message popup on an unlocked handset, or on a handset
To cancel the alarm before it's sent out, refer to
alarm on page 52.
A successfully sent alarm is indicated with:
• beep and vibrator signals
• an orange LED flash
26 April 2016 / Ver. D
9. Personal Alarm
password protection.
with swipe lock protection.
in the App view.
in the status bar, and No-
Figure 24 and
9.2.3 Cancel a Man-down or No-movement
TD 93066EN
Figure 24)
51