Personal Alarm; Top Button Alarm; Man-Down And No-Movement Alarm - ASCOM Myco User Manual

User Manual
Ascom Myco Wi-Fi and Cellular Smartphone
9.

Personal Alarm

This chapter describes the following alarm related topics:
•

9.1 Top Button Alarm

•

9.2 Man-down and No-movement Alarm

• 9.3 Automatic Call after Alarm
9.1 Top Button Alarm
Multi-press or long press the top handset button to send out a personal alarm (for
instructions on how to use the multi-press and long press input modes, refer to
or Multifunction button
mode. An alarm can be either a personal alarm with a functionality, or a test alarm to test
the personal alarm. The type of alarms used are set by the system administrator. Refer to
the handset Configuration Manual
When an alarm is sent an information text is displayed in the top display (by default
"Personal alarm" or "Test alarm"), and a notification bar with the same text is shown in the
main display. The alarm is sent to the alarm central that distributes it further. If the personal
alarm, or test alarm, is successfully sent the top display text and notification bar confirm
that with a
The handset can be programmed to automatically call a predefined number after the alarm
has been sent, see
NOTE: It is always possible to send out a personal alarm, even when speaking, using apps, or
while the handset is locked.
9.2 Man-down and No-movement Alarm
The Man-down and No-movement alarms provide personal safety monitoring with accident
alerts. These alarms are suitable for workplaces where maximum security and accessibility is
required. If an accident occur, colleagues and management are informed within seconds and
the person in need can be located quickly.
• The Man-down alarm reacts if the handset is tilted (default 45°) from the vertical for a
predefined period of time (default 7 seconds).
• The No-movement alarm will react if no movement is detected during a predefined
period of time (default 30 seconds).
TIP: The handset can be programmed to automatically call a predefined number after the
alarm has been sent, see
For information on how to:
• Activate or deactivate the Man-down or No-movement alarms, see
deactivate the Man-down or No-movement alarms
• Read the alarm indications, see
51.
• Cancel a Man-down or No-movement alarm, see
movement alarm
26 April 2016 / Ver. D
9. Personal Alarm
on page 50
on page 52
on page 8). Two different alarms can be set, one for each input
for information on how to configure personal alarms.
or marker.
9.3 Automatic Call after Alarm
9.3 Automatic Call after Alarm
9.2.2 Man-down and No-movement indication
on page 52.
on page 50
on page 52.
on page 52.
on page 51.
9.2.3 Cancel a Man-down or No-
TD 93066EN
3.1.5 Alarm
9.2.1 Activate or
on page
50