Wake And Unlock The Handset, Or Lock And Put It To Sleep; Adjust The Volume; Switch To Silent Or Vibrator Only Mode - ASCOM Myco User Manual

User Manual
Ascom Myco Wi-Fi and Cellular Smartphone
3 Tap OK.
4.2

Wake and Unlock the Handset, or Lock and Put it to Sleep

The handset automatically turns to sleep after 1 minute (default), to save battery time. This
setting can be configured in the handset, refer to
screen lock functionality is enabled (default) the handset will be locked automatically when
entering sleep mode.
By default the lock screen shows the current time and date, but can also be set to show
alerts, warnings, messages, and missed calls if lock screen widgets are enabled. Refer to
10.4 Lock Screen Notification
notifications.
NOTE: Incoming calls can be answered, and the personal alarm button can be pressed while
the handset is locked. An emergency call can also be made while the screen is locked,
depending on configuration. All alerts appear in the top display, even when the
handset is in sleep mode. Refer to
details on how to handle alerts and calls.
Wake/unlock the handset
To wake the handset from sleep mode, do the following:
1 Press the power or home button.
2 If needed, swipe the
NOTE: If set by the system administrator, a PIN or password might be needed to unlock the
handset.
Put to sleep/lock the handset
• Press the power button, or wait until the handset automatically turns to sleep.
TIP: When not using the handset, put it to sleep mode. This avoids unintentional display taps
as it locks the screen.
4.3

Adjust the Volume

Adjust the volume by pressing the volume button (up or down), or by changing the volume
in the Settings app. Refer to
4.4

Switch to Silent or Vibrator only mode

Ringtones and notification signals can be switched off by setting the handset to either
Silent or Vibrator only mode. In Silent mode the vibrator is also switched off.
NOTE: The handset can be configured to not allow settings below a certain volume, refer to
the handset Configuration Manual
To set the handset to Vibrator only/Silent mode, do one of the following:
• Make a long press on the volume down button. After the lowest volume level the
handset enters Vibrator only mode, then Silent mode.
• Long press the power button, and tap
26 April 2016 / Ver. D
4. Basics
15.1.4 Sleep timeout
on page 54 for information on how to use lock screen
7. Alerts on page 41 or
icon in any direction to unlock the screen.
15.2.1 Volumes on page 65.
for details.
for Vibrator only, or
TD 93066EN
on page 65. If the
5. Calling on page 27 for
for Silent mode.
11