Analyse The Usb Memory Key Content; Save A Document On A Usb Memory Key; Activate/Deactivate File Automatic Deletion On A Usb Memory Key - Ricoh LASER FACSIMILE Operating Instructions Manual

5 You have three possibilities to delete your files:
- ALL, to delete all the files located in the USB
memory key.
Select ALL with the
confirm with OK.
You come back to the previous menu.
- SERIES, to delete several files located in the
USB memory key.
Select SERIES with the
confirm with OK.
FIRST FILE and the first indexed file appears
on the screen, select with the
the file to delete and confirm with OK. A star ( )
appears on the left of the file.
LAST FILE appears on the screen, select with
the or buttons the other files to delete and
confirm with OK.
Press the button.
You come back to the previous menu
- SELECTION, to delete only one file located in
the USB memory key.
Select with the
and confirm with OK.
Press the button.
You come back to the previous menu.
6 Quit this menu by pressing

Analyse the USB memory key content

After a period of inactivity, your machine will return to the
main menu. To view the USB memory key again please
proceed as follows:
07 - MEDIA / ANALYSE MEDIA
1 Press on , enter 07 with the keyboard.
2 The USB memory key analysis is started.
3 You can print or delete the detected files located in
your USB memory key. Refer to the previous
chapters.

Save a document on a USB memory key

This function allows you to digitise and save a document
directly in the folder SCAN on a USB memory key. The
folder SCAN is created by the application.
Before digitalising a document, make
sure that your USB memory key has
sufficient disk space. If not, you can:
• delete manually the files, see
section Delete your files
located in the key, page 34,
Important or
• activate the option that deletes
automatically the oldest files
located in the SCAN folder, see
section Activate/deactivate file
automatic deletion on a USB
memory key, page 35.
or buttons and
or buttons and
or buttons
or buttons the file to delete
the button.
1 Place the document to be copied in the automatic
document feeder, printed face on the top.
2 Insert the USB memory key in the USB connector
of your multifunction device.
The USB memory key analysis is started.
When the analysis is finished, the MEDIA menu is
displayed.
3 Select
SCAN TO
confirm with the OK button.
You can also access this function in
two other ways:
•
Important
•
4 Choose the
COLOUR
with the
COLOUR
OK.
5 With the alphanumeric keyboard, give a name to
the scan file (up to 20 characters) and confirm with
OK.
6 Choose the scan format between
and confirm to start the scan and the recording of
the document.
allows to have the same kind of file as a
IMAGE
photo. is a format for the digital documents
PDF
creation.
The beginning button
and sends a file to the support with the parameters
defined in the analysis format.
With the IMAGE
BLACK&WHITE the picture will be saved in TIFF format,
if you have selected COLOUR the picture will be saved in
JPEG format.
Activate/deactivate file automatic
deletion on a USB memory key
This option, when activated, deletes automatically the
oldest files in the folder SCAN on the USB memory key,
in order to save a new digitalised document when the disk
space is insufficient.
This option is ineffective when the
SCAN folder is empty and the USB
memory key is full. You must then
delete manually the files in order to
Warning
free up disk space, see section
Delete your files located in the
key, page 34.
- 35 -
Laser Facsimile
with the or buttons then
by pressing the button of
the machine deck then by
selecting SCAN-TO-MEDIA.
By pressing the button from
the screen saver then by typing
03 on the digital keyboard.
between
BLACK&WHITE
or buttons and the button
and
IMAGE
immediately starts the scan
format, if you have
and
,
PDF
selected