Mf Monitor; Graphical Presentation; Display The Consumable Status; Scan To - Ricoh LASER FACSIMILE Operating Instructions Manual

MF Monitor

Graphical presentation

Run the application by clicking on the MF Monitor icon
located on your desktop or from the menu S
> P > C
ROGRAMS OMPANION
P LL > MF M .
RO ONITOR
From this screen you can monitor the information or
configure your multifunction machine from the tabs:
- C : Presents the multifunction machine
OMPANION
screen.
- C : Displays the consumables status.
ONSUMABLES
- S T : Scan Mode and Resolution parameters
CAN O
setup, these parameters will be taken into account
when clicking on the

Display the consumable status

The following information will be available from the
Consumables tab:
- current consumables status,
- number of printed pages,
- number of scanned pages.

Scan To

The setup of this tab, becomes the default setup for the
scanner.
TART
S > C S
UITE OMPANION UITE
button from the machine.
The function S
Note used if the application is running. If
this is not the case, activate it.
1 Select the Scan To tab.
2 Select one of the possible choices:
- colour,
- grayscale,
- black and white.
3 Select the scanner resolution (72 dpi to 4800 dpi).
4 Confirm your choices by clicking on the OK button.
Companion Suite Pro LL
functionalities

Document analysis

The document analysis can be carried out in two ways:
• either by the S
CAN
from the MF Director window or from the
from the machine),
• or directly from a TWAIN standard compatible
application.

Analysis with Scan To

Run the application by clicking on the MF Director icon
located on your desktop or from the menu S
> P > C
ROGRAMS OMPANION
P LL > MF D
RO IRECTOR
- 41 -
Laser Facsimile
T can only be
CAN O
T function (application accessible
O
S > C
UITE OMPANION
.
button
TART
S
UITE