Installation Instructions - Belling 600G Users Manual & Installation Handbook

Table of Contents

Advertisement

These installation instructions are for use with Gas Built In ovens. They are applicable for
all sizes - please make sure that you follow the instructions which are relevant to your appli-
ance.
Before you start - please read the instructions carefully - planning your installation will save
you time and effort.
Look at the different ways the appliance can be installed - as shown on the following
G
pages - and plan the installation to suit your situation.
Leave the appliance in the base tray packaging until you are ready to install it. When
G
you remove the appliance from the base tray packaging, take care not to damage it.
Whilst every care is taken to eliminate burrs and raw edges from this product, please
G
take care when handling - we recommend the use of protective gloves during installa-
tion.
Please be aware that this appliance may weigh more than you think. Take care when lift-
G
ing it into the housing unit - always use an appropriate method of lifting.
Please note that all dimensions and sizes given are nominal, some variation is to be
G
expected.
If this appliance is to be installed near to a corner where the adjacent cabinets run at
G
right angles forward of the appliance, there must be a gap of at least 90mm between the
appliance and the cabinets, to prevent overheating of the cabinets.
Important: Do not modify the outer panels of this appliance in any way.
Fixing screws - The fixing screws are in a polythene bag in the oven pack. Depending on
the method of installation, some of the screws may not be needed.
If you have a non standard size of cabinet which leaves a gap above or below the appli-
ance, you may be able to buy a trim kit (to fill in the gap) from the supplier of your cabi-
nets.
Quantity
6
12
6
2
Installing Your Cooker
Colour
Description
Silver
N
8 x 12mm long
o
Self tapping screw
Black
N
8 x 12mm long
o
Chipboard screw
Silver
N
8 x 25mm long
o
Chipboard screw
Silver
N
8 x 12mm long
o
Self tapping screw
For Fixing:
Runners to appliance
Runners and sidetrims to cabinet
or housing
Appliance to cabinet
Appliance to sidetrims
38

Advertisement

Table of Contents
loading

This manual is also suitable for:

700g900gXou70g700gdoXou90g900gdo ... Show all

Table of Contents