Belling 600G Users Manual & Installation Handbook page 38

Aluminium surfaces (Aluminium finish models only)
fascia panel, door handles, doors
Use a clean cloth wrung out in hot soapy water, and dry with a soft cloth.
G
More stubborn marks can be removed using diluted liquid cleaner in the cor-
G
rect concentration (according to manufacturers instructions. We recommend
that you clean the whole of the aluminium area to maintain a uniform finish.
Do not use cream cleaners, as they will mark the surface.
G
Do not use undiluted bleach or any products containing chlorides as they can
G
permanently damage the aluminium.
Wipe any spillage immediately, taking care to avoid burning your hands.
Stainless steel surfaces (Stainless steel finish models only)
fascia panel, door handles, doors
Only use a clean cloth wrung out in hot soapy water, and dry with a soft cloth.
G
Stubborn marks can be removed using a stainless steel cleaner. We recommend
G
that you clean the whole of the stainless steel area to maintain a uniform finish.
Supplies can be purchased from the Customer Care Centre.
Do not use undiluted bleach or any products containing chlorides as they can
G
permanently damage the steel.
Sharp objects can mark the surface of stainless steel, but will become less notice-
able with time.
To maintain the finish of the stainless steel, or to remove any greasy marks, rub
the stainless steel surface sparingly with a minimum amount of Baby Oil.
Do not use cooking oils, as these may contain salt which can damage the stainless
steel surface.
Some foods are corrosive eg; vinegar, fruit juices and especially salt - they can
mark or damage aluminium if they are left on the surface.
Cleaning Your Appliance
35