Belling 600G Users Manual & Installation Handbook page 8

This appliance comes with an automatic programmer and clock. Through your
programmer you will be able to set the time of day, set the minute minder, and
semi and fully automatically cook. The programmer is vital to the working of
your appliance, and reading this section will make sure that you get the most
out of your ovens.
There are three buttons on this type of timer. The table below shows you what
their symbols look like, depending on the model type, and what they do.
Belling
symbol
The programmer/clock
Introduction
The programmer buttons
Stoves
-
symbol
+
Up / Plus
Used to increase cook / end time,
add minutes to the minute minder
and adjust the time of day.
Function button
Used to select the functions available
on this timer.
Press once for: Minute Minder.
Press twice for: Cook time
Press three times for: End time.
How to use these functions is
explained later on in this section.
What is it?
Down / Minus
Used to decrease cook / end time,
remove minutes from the minute
minder and adjust the time of day.
Also for listening to and setting the
alarm tone.
5