GIRBAU RMS610 Operating Instructions Manual page 31

Temperature unit
The bath water temperature can be displayed in Celsius or Fahrenheit degrees.
OPTIONS MEANING
C Temperature unit in Celsius degrees
F Temperature unit in degrees Fahrenheit
The 2 / 4 keys allow the modification of the option displayed.
The 1 key validates the selection on the display and allows the user to access the following programmable
function.
Dispenser cleaning
CAUTION!
DO NOT ACTIVATE THIS OPTION IN MACHINES CONNECTED TO EXTERNAL DOSING
INSTALLATIONS.
This option activates the cleaning of the dispenser liquid product compartments by opening their water filling
valves to eliminate the possible remaining products.
Option available from software version no. 22.
OPTIONS MEANING
dc-0 Dispenser cleaning NO activated
dc-1 Dispenser cleaning YES activated
The 2 / 4 keys allow the modification of the option displayed.
The 1 key validates the selection on the display and allows the user to access the following programmable
function.
External dosing
Adapts the operation of the control panel LEDs to the washer operation.
Option Ed-1 has to be programmed only if washer uses wash products form an external dosing installation.
OPTIONS MEANING
Ed-0 Units with external dosing unavailable
Ed-1 Units with external dosing available
The 2 / 4 keys allow the modification of the option displayed.
The 1 key validates the selection on the display and allows the user to access the following programmable
function.
Beep time
It determines the beep duration when a program stopped by the STOP key restarts.
Minimum programmable time: 10 sec.
Maximum programmable time: 60 sec.
The 2 / 4 keys allow the modification of the option displayed.
The 1 key validates the selection on the display and allows the user to access the following programmable
function.
Selected program by default
Determines the selected program by default when the door is closed.
Selected program by default: program 3.
The 2 / 4 keys allow the modification of the option displayed.
The 1 key validates the selection on the display and allows the user to access the following programmable
function.
Modification of operation parameters
31
Cod. 598144
Rev. 11/0717