GIRBAU RMS610 Operating Instructions Manual page 15

Fill the compartments with the corresponding products, according to these symbols.
Symbols used in the dispenser (Fig. 4.2, 4.3, 4.4 and 4.5)
Powdered detergent. Normally used in the pre-wash phase
Powdered detergent. Normally used in the wash phase
Liquid product. Normally used for bleaching (chloride, bleach, etc.)
Liquid product. Normally used as a softener/neutraliser
IN ORDER TO OPERATE CORRECTLY AND TO PREVENT POSSIBLE DAMAGE AND SPLASHING,
THE DISPENSER DRAWER MUST ALWAYS REMAIN CLOSED, EXCEPT WHEN ADDING
PRODUCTS.
SUDS CONTROL
The mechanical action of front-loading washing machines improves the quality of the wash but
encourages the creation of suds.
Remember that a suds bath always reduces the efficiency of your wash. ALWAYS USE
CONTROLLED SUDS DETERGENT.
Oversudsing causes an increase in the pressure inside the machine and decreases the efficiency of
the sealing systems.
Repeated washing with a large amount of suds considerably reduces the life of seals and bearings.
THIS CIRCUMSTANCE IS NOT COVERED BY THE MACHINE'S WARRANTY.
Program execution mode
FUNCTION
15
PROGRAMMING
d1
d2
d3
d4
Cod. 598144
Rev. 11/0717