Turning The Stabilizing Feet - IBM 7378 Problem Determination And Service Manual

Turning the stabilizing feet

To rotate the front feet, complete the following steps:
1. Carefully position the server on a flat surface, with the feet hanging over the
2. Press in on the clips that hold the feet in place; then, pry the feet away from the
3. Reinstall the feet in the opposite location, with the tab on the feet extending
272
IBM System x3400 M3 Types 7378 and 7379: Problem Determination and Service Guide
edge of the flat surface to ease removal.
server. In some cases, you might need a screwdriver to press in on the clips.
beyond the edge of the server.
Feet