Installing The Rear Adapter-Retention Bracket - IBM 7378 Problem Determination And Service Manual

Installing the rear adapter-retention bracket

To install the rear adapter-retention bracket, complete the following steps:
1. Insert the bottom hinge point on the rear adapter-retention bracket into the
2. Install the adapters (see "Installing an adapter" on page 215).
3. Close the rear adapter-retention bracket.
4. Install and lock the left-side cover (see "Installing the left-side cover" on page
5. Reconnect the external cables and power cords; then, turn on the attached
matching hole in the chassis; then, insert the top hinge point into the matching
hole.
181).
devices and turn on the server.
Chapter 5. Removing and replacing server components
219