8. Lift the battery and the battery carrier away from the ServeRAID adapter.
If you are instructed to return the ServeRAID adapter battery, follow all packaging
instructions, and use any packaging materials for shipping that are supplied to you.
Installing a ServeRAID adapter battery
To install the RAID adapter battery in the server, complete the following steps:
158
IBM System x3400 M3 Types 7378 and 7379: Problem Determination and Service Guide
1. Read the safety information that begins on page vii and "Handling
static-sensitive devices" on page 151.
2. Turn off the server and all attached devices.
3. Disconnect all external cables and power cords.
4. Carefully turn the server on its side so that it is lying flat, with the cover facing
up.
Attention:
Do not allow the server to fall over.