Turning The Stabilizing Feet - IBM System x3500 Service Manual

Turning the stabilizing feet

To rotate the front feet, complete the following steps.
1. Carefully position the server on a flat surface. The feet should hang over the
2. Press in on the clips to hold the feet in place; then, pry the feet away from the
3. Reinstall the feet in the opposite location. The tab on the feet should extend
edge of the flat surface to ease removal.
server. In some cases, you might need a screwdriver to pry the feet from the
server.
beyond the edge of the server.
Feet
Chapter 4. Removing and replacing server components
59