Table of Contents
Advertisement
2. Turn off the server and peripheral devices and disconnect the power cords.
3. Remove the cover (see "Removing the left-side cover" on page 181).
4. Unlock the retention latch by pushing it down toward the system board.
5. Grasp the flash device and pull to remove it from the connector.
6. Return the retention latch to the locked position by pulling it away from the
system board.
7. If you are instructed to return the flash device, follow all packaging instructions,
and use any packaging materials for shipping that are supplied to you.
Chapter 5. Removing and replacing server components
235
Advertisement
Table of Contents
