Moving The Stabilizing Feet - IBM eServer 200 xSeries User Reference Manual

Moving the stabilizing feet

The four feet on the bottom of the server provide additional stability when the feet are
placed in the stabilizing position.
Complete the following steps to place the feet in the stabilizing position.
1. Place the server on its side.
2. Locate the release tab inside the foot; then, lift up on the tab.
3. Rotate the foot inward to the unlocked position; then, remove the foot from the
4. Align the post in the center of the foot with the hole on the bottom of the server
32
IBM xSeries 200: User's Reference
Note: The following illustration shows the rear feet located on the bottom rear of
the server.
server.
and place the foot between the guides as indicated.
Note: The following illustration shows the rear feet located on the bottom rear of
the server.
Release tab
Feet (unlocked position)
Release tab
Guides
Feet (locked position)
Guides