Additional Resources; Document And Software Version; Approvals And Certifications - Danfoss VLT HVAC Drive FC 102 Instruction Manual

Introduction

1.2 Additional Resources

•
®
VLT HVAC Drive FC 102 Design Guide holds all
technical information about the adjustable
frequency drive and customer design and
applications.
•
®
VLT HVAC Drive FC 102 Programming Guide
provides information on how to program and
includes complete parameter descriptions.
•
Application Note, Temperature Derating Guide.
•
MCT 10 Set-up Software Instruction Manual enables
the user to configure the adjustable frequency
drive from a Windows
•
®
Danfoss VLT Energy Box software at
www.danfoss.com/BusinessAreas/DrivesSolutions,
then select PC Software Download.
•
®
VLT HVAC Drive BACnet, Instruction Manual.
•
®
VLT HVAC Drive Metasys, Instruction Manual.
•
®
VLT HVAC Drive FLN, Instruction Manual.
Danfoss technical literature is available in print from local
Danfoss Sales Offices, or as electronic copies at:
www.danfoss.com/BusinessAreas/DrivesSolutions/Documen-
tations/Technical+Documentation.htm

1.3 Document and Software Version

This manual is regularly reviewed and updated. All
suggestions for improvement are welcome. Table 1.2 shows
the document version and the corresponding software
version.
Edition Remarks
MG11F5xx Replaces MG11F4xx
Table 1.2 Document and Software Version

1.4 Approvals and Certifications

The adjustable frequency drive complies with UL508C
thermal memory retention requirements. For more
information, refer to the section Motor Thermal Protection
in the product specific design guide.
MG11F522
Instruction Manual
™
-based PC environment.
Software version
4.1x
Danfoss A/S © 08/2014 All rights reserved.
NOTICE!
Imposed limitations on the output frequency
(due to export control regulations):
From software version 3.92, the output frequency of the
adjustable frequency drive is limited to 590 Hz.
1 1
5