Installation Instructions; Cooling Systems - KEB COMBIVERT F5 Instruction Manual

1.8

Installation instructions

1.8.1

Cooling systems

The KEB COMBIVERT F5 is available for different cooling systems:
Heat sink with cooling fan (mounted version)
The standard version is delivered with heat sink and cooling fan.
Special versions
The dissipation of power loss must be guaranteed by the machine builder.
Flat rear
This version is not equipped with a heat sink. The unit must be mounted on an appropriate
ground for heat dissipation.
Convection (through-mount version)
In this version the heat sink is placed externally with a cutout in the control cabinet.
Warning
DO NOT TOUCH!
In case of burn, cool inflicted area
immediately and seek medical attention.
© 2005 KEB
Hot Surface
Heat sinks can reach temperatures, which can cause burns when
CAUTION
!
touching. If in case of structural measures a direct contact cannot
be avoided, a warning notice "hot surface" must be mounted at the
Hot Surfaces
machine.
9