2.6 $AA1
Description : Perform Zero Calibration
Syntax : $AA1[CHK](cr)
$
delimiter character
AA
address of setting module (00 to FF)
1
command for performing zero calibration
Response :
Invalid Command :
Syntax error or communication error may get no re-
sponse.
!
delimiter for valid command
?
delimiter for invalid command or the calibration is not
enabled
AA
address of response module(00 to FF)
Example :
Command : $011
Perform address 01 zero calibration, return success.
Command : $021
Perform address 02 zero calibration, return the calibration is
not enabled before perform calibration command.
Related Command :
Sec.2.5 $AA0, Sec.2.20 ~AAEV
Related Topics :
Sec.1.9 Calibration
Rev:B1.0
Valid Command :
I-7011, I-7018 User Manual
!AA[CHK](cr)
?AA[CHK](cr)
Receive : !01
Receive : ?02
27