Epson MX-80 User Manual page 11

Figure 1-6
Now tip the printer rightside up again.
Gently wiggle the top cover loose. Wires are hooked to it! We are not going to
completely remove the cover — only open it enough to gain access to the
switches.
Lift the cover up, mostly from the left side, and slide it gently to the right to free
it from the roller shaft. Be careful not to pull the wires on the right hand side.
With just a bit of class we can maneuver the cover so it stands firmly in place, as a
sentinel guarding the goodies.
Take a minute to gawk at all the stuff in the box. Wow! As Custer said, "Look at
all those . . ." well, anyway.
Wonder how they sell it as cheap as they do? (Hope it prints as good as it looks.)
Figure 1-7