Connecting The User System - Renesas Emulation Probe for M32C/88 Group M30880T-EPB User Manual

M30880T-EPB User's Manual

2.9 Connecting the User System

There are eight ways available to connect the emulation probe to user systems as shown in Figure 2.7.
0.65-mm-pitch
M30800T-PTC
(included)
LCC socket M3T-DIRECT100S
100-pin LCC 100-pin QFP
(included) (not included)
Figure 2.7 Connection of the M30880T-EPB and user system
Note on Connecting the User System:
Take care not to attach the converter board in a wrong direction. It may cause a fatal damage to the emulator.
REJ10J0497-0100Z Rev.1.00 January 16, 2005
100-pin
M30800T-PTC
(included)
M3T-100LCC-DMS
(not included)
M3T-FLX100-T M3T-FLX100-R
(not included) (not included)
*1
M3T-DUMMY100S M3T-FLX-100NRB
100-pin QFP 100-pin QFP
(not included) (not included)
: No. 1 pin
*1: These items are available in one package.
CAUTION
Emulation probe
0.5-mm-pitch
M30800T-PTC
(included)
M3T-FLX100-T
(not included)
M3T-F160-100NSD M3T-100LCC-QSD
100-pin LQFP 100-pin QFP
(not included) (not included)
144-pin 0.5-mm-pitch
M3T-100LCC-DMS
(not included)
M3T-FLX100-R
(not included)
M3T-FLX-100NSD M3T-FLX-144NSD
100-pin QFP 144-pin LQFP
(not included) (not included)
Page 29 of 100
2. Setup