If An Error Is Detected In The Self-Check - Renesas Emulation Probe for M32C/88 Group M30880T-EPB User Manual

M30880T-EPB User's Manual

2.8.2 If an Error is Detected in the Self-check

If the self-check does not result normally (ERROR 1 to ERROR 4 in Figure 2.6), check the following.
(1) Recheck the connection of the emulation probe and PC7501.
(2) Redownload the proper firmware.
Note on the Self-check:
If the self-check does not result normally (excluding user system errors), the emulation probe may be damaged.
Then contact your local distributor.
REJ10J0497-0100Z Rev.1.00 January 16, 2005
IMPORTANT
2. Setup
Page 28 of 100