Starting Up The Emulator Debugger (Emem Dialog Box) - Renesas Emulation Probe for M32C/88 Group M30880T-EPB User Manual

M30880T-EPB User's Manual

3.2 Starting Up the Emulator Debugger (EMEM Dialog Box)

(1) Status tab
1. Specifying the processor mode
Notes on Selecting a Processor Mode:
An available processor mode is single-chip mode only. Therefore, do not select any other processor mode.
When setting single-chip mode, the level of pin CNVSS of the MCU status should be "L". The MCU status
shows the pin level of the user system.
REJ10J0497-0100Z Rev.1.00 January 16, 2005
Specifying the processor mode
Select the Single-chip Mode.
IMPORTANT
3. Usage (How to Use the Emulator Debugger)
Page 55 of 100