Forced Output Function - Panasonic FP7 User Manual

7.4.3 Forced Output Function

• The outputs of external output 0 terminal and external output 1 terminal can be controlled on
the ladder monitor or device monitor of tool software FPWIN GR7. They can be also turned
on or off by user programs.
• It can be used for the confirmation of wirings.
 I/O Allocation of external output terminals
Signal name
External output 0 forced ON
External output 0 forced OFF
External output 1 forced ON
External output 1 forced OFF
(Note 1): The above I/O numbers are those for the slot number 1 and the starting word number 10. The I/O numbers
actually used vary according to the slot number where the unit is installed and the starting word number.
KEY POINTS
•
The above forced output function is a function of the high-speed counter
unit. The forced I/O function of programming tool FPWIN GR7 is not used.
Phone: 800.894.0412 - Fax: 888.723.4773 - Web: www.clrwtr.com - Email: info@clrwtr.com
Effective
CH0
condition
Level Y109
Level Y10A
Level Y10B
Level Y10C
CH1 CH2 CH3
Y119 Y129 Y139
Y11A Y12A Y13A
Y11B Y12B Y13B
Y11C Y12C Y13C