Enable Reset Count Operation - Panasonic FP7 User Manual

5.2.6 Enable Reset Count Operation

• The enable reset count operation is the operation that the enable and reset functions are
allocated to the control signal.
• Resets the count value to zero when the counter becomes enabled by the change in the
control signal.
 Positive logic enable operation and reset operation at rising edge
Addition
Counter input
Subtraction
Control signal
(Reset process)
(Enable process)
Count value
 Negative logic enable operation and reset operation at trailing edge
Addition
Counter input
Subtraction
Control signal
(Reset process)
(Enable process)
Count value
Phone: 800.894.0412 - Fax: 888.723.4773 - Web: www.clrwtr.com - Email: info@clrwtr.com
0
0