Panasonic FP7 User Manual page 22

Input terminal
Pin No.
ch0/2 ch1/3
A1 A11
A2 A12
B1 B11
B2 B12
A3 A13
A4 A14
B3 B13
B4 B14
A5 A15
A6 A16
B5 B15
B6 B16
Control 0/1 (common)
Pin No.
ch0/2 ch1/3
A7 A17
B7 B17
A8 A18
B8 B18
External output 0/1 and Power supply terminal (common)
Pin No.
ch0/2 ch1/3
A9 A19
B9 B19
A10 A20
B10 B20
(Note 1): For using external output (A9, A19, B9, B19), power should be supplied to the power supply for output (A10,
A20, B10, B20). When the external output is not used, there is no need to supply the power to the power supply
for output.
Phone: 800.894.0412 - Fax: 888.723.4773 - Web: www.clrwtr.com - Email: info@clrwtr.com
Circuit
A1/A11
A2/A12
B1/B11
B2/B12
A3/A13
A4/A14
B3/B13
B4/B14
A5/A15
A6/A16
B5/B15
B6/B16
Circuit
A7/A17
B7/B17
A8/A18
B8/B18
Circuit
A10/A20
A9/A19
B9/B19
B10/B20
Signal name
Input A: 24 VDC (12 to 24 VDC)
Input A: 5 VDC (3.5 to 5 VDC)
Input A: COM
Input A: COM
Input B: 24 VDC (12 to 24 VDC)
Input B: 5 VDC (3.5 to 5 VDC)
Input B: COM
Input B: COM
Input Z: 24 VDC (12 to 24 VDC)
Input Z: 24 VDC (3.5 to 5 VDC)
Input Z: COM
Input Z: COM
Signal name
Control 0: (12 to 24 VDC)
Control 0: COM
Control 1: (12 to 24 VDC)
Control 1: COM
Signal name
External output 0: Sink output (5 to 24 VDC,
15 mA)
External output 1: Sink output (5 to 24 VDC,
15 mA)
Power supply for output: 24 VDC
Power supply for output: GND