Panasonic FP7 User Manual page 72

 Pattern of storage in unit memories (UM)
• Set data is stored in 8-word blocks of corresponding unit memories in the following format.
• When using user programs, set data in corresponding unit memory numbers.
Example 1) For the comparison data 0 of CH0, it is allocated to UM00080 to UM00087.
Example 2) For the comparison data 1 of CH0, it is allocated to UM00088 to UM0008F.
• The bit numbers 0 to 15 in the areas of +2 to +5 in the figure below correspond to the
comparison match 0 flag to F flag.
Low words of target value
0
+1
High words of target value
+2
15 14 13 12 11 10 9 8 7 6 5 4 3
+3
15 14 13 12 11 10 9 8 7 6 5 4 3
15 14 13 12 11 10 9 8 7 6 5 4 3
+4
+5 15 14 13 12 11 10 9 8 7 6 5 4 3
+6
+7
REFERENCE
•
For details of unit memory numbers, refer to 11.4 Unit Memory Detailed
Specifications.
Phone: 800.894.0412 - Fax: 888.723.4773 - Web: www.clrwtr.com - Email: info@clrwtr.com
2 1
2 1
2 1
2 1
Not used
Not used
Target values
Subtraction reset pattern
0
Addition reset pattern
0
0 Subtraction set pattern
0 Subtraction reset pattern
Reserved for system
1: Set output, 0: No change
1: Reset output, 0: No change
1: Set output, 0: No change
1: Reset output, 0: No change