Unit Allocation; Confirmation Of I/O Allocation Information - Panasonic FP7 User Manual

4.1 Unit Allocation

4.1.1 Confirmation of I/O Allocation Information

Input and output relays are allocated.
 Input relays
I/O number
CH0 CH1 CH2
X0 X20 X40
X1 X21 X41
X2 X22 X42
X3 X23 X43
X4 X24 X44
X5 X25 X45
X6 X26 X46
X7 X27 X47
X8 X28 X48
X9 X29 X49
XA X2A X4A
XB X2B X4B
XC X2C X4C
XD X2D X4D
XE X2E X4E
XF X2F X4F
X10 X30 X50
~ ~
X19 X39 X59
X1A X3A X5A
~ ~
X1F X3F X5F
(Note 1): The I/O numbers actually allocated are the numbers based on the starting word number allocated to the unit.
Example) When the starting word number for the unit is "10", the operation ready done flag for CH0 is X100.
Phone: 800.894.0412 - Fax: 888.723.4773 - Web: www.clrwtr.com - Email: info@clrwtr.com
Name
CH3
X60 Operation ready done
X61 Counter enable
X62 Count direction
X63
―
X64 Capture 0 done flag
X65 Capture 1 done flag
External output 0 signal
X66
monitor
External output 1 signal
X67
monitor
X68 Input A signal monitor
X69 Input B signal monitor
X6A Input Z signal monitor
X6B Control 0 signal monitor
X6C Control 1 signal monitor
X6D Overflow annunciation
X6E Underflow annunciation
X6F Error annunciation
X70
Comparison match 0 flag
~ ~
Comparison match 9 flag
X79
X7A
Comparison match A flag
~ ~
Comparison match F flag
X7F
Flag to indicate the counter operation is ready.
Flag to indicate the counter operation is enabled.
Flag to indicate a count direction.
ON: Forward (Addition) OFF: Reverse
(Subtraction)
―
Flag to announce that the count value is stored in
capture 0 register.
Flag to announce that the count value is stored in
capture 1 register.
Monitors the output state of external output 0
signal.
Monitors the output state of external output 1
signal.
Monitors the input state of input A signal.
Monitors the input state of input B signal.
Monitors the input state of input Z signal.
Monitors the output state of control 0 signal.
Monitors the output state of control 1 signal.
Flag to announce the occurrence of overflow or
underflow (Enabled for the linear counter only.)
Flag to announce the occurrence of an error.
~
Flag to reflect the results of the band comparison
function or target value match function.
~
Description