Can Inverter Measure Mid-Point Voltage Of Battery Bank; I Have A Lithium Battery, How Should I Configure It - Ingeteam INGECON SUN STORAGE 1Play Technical Manual

INGECON SUN STORAGE 1Play
Additionally, bear in mind that the Hardware of the ISS 1Play is limited on the DC side to take a maximum
current of 50 A from batteries and on the AC side is limited to the Output (AC) Rated Power.

3.2.6 Can inverter measure mid-point voltage of battery bank?

The inverter doesn't measure in a middle of the chain. The inverter measures the total voltage of the battery
bank. So, the charge process of the lead-acid batteries (absorption, flotation and equalization) is controlled
with the total voltage of the chain.

3.2.7 I have a Lithium battery, how should I configure it?

Lithium-ion batteries suitable for operation with the INGECON SUN STORAGE 1Play have their own
advanced battery management, usually programmed by the manufacturer and built into the batteries (BMS).
Ingeteam cannot influence in any way the operating mode of this advanced external battery management.
To configure and use the lithium battery, first it must be fully compatible with the INGECON SUN STORAGE
1Pay. For more information on compatible lithium batteries, refer to the "List of lithium batteries approved for
INGECON SUN STORAGE 1Play" available on the Ingeteam website.
If the battery model is not listed consult Ingeteam.
16/29
Technical Guide 10/11/2017