Adjusting Scanner Registration - Lexmark MB2338 User Manual

Troubleshooting
Action
Step 3
a
Turn off the printer, wait for about 10 seconds, and then turn the
printer on.
b
Copy or scan the document.
Is the scanner responding?

Adjusting scanner registration

1
From the control panel, navigate to:
Settings > Maintenance > Configuration Menu > Scanner Configuration > Scanner Manual Registration
For non-touch-screen printer models, press
2
From the Print Quick Test menu, select Start.
3
Place the Print Quick Test page on the scanner glass, and then select Flatbed Registration.
4
From the Copy Quick Test menu, select Start.
5
Compare the Copy Quick Test page with the original document.
Note: If the margins of the test page are different from the original document, then adjust Left Margin and
Top Margin.
6
Repeat step 4 and
Adjusting ADF registration
1
From the control panel, navigate to:
Settings > Maintenance > Configuration Menu > Scanner Configuration > Scanner Manual Registration
For non-touch-screen printer models, press
2
From the Print Quick Test menu, select Start.
3
Place the Print Quick Test page on the ADF tray.
4
Select Front ADF Registration or Rear ADF Registration.
Notes:
•
To align Front ADF Registration, place the test page faceup, short edge first into the ADF.
•
To align Rear ADF Registration, place the test page facedown, short edge first into the ADF.
5
From the Copy Quick Test menu, select Start.
6
Compare the Copy Quick Test page with the original document.
Note: If the margins of the test page are different from the original document, then adjust Horizontal
Adjust and Top Margin.
7
Repeat step 5 and
step 5 until the margins of the Copy Quick Test page closely match the original document.
step 6 until the margins of the Copy Quick Test page closely match the original document.
Yes
The problem is
solved.
to navigate through the settings.
to navigate through the settings.
182
No
Contact customer
support.