E-mailing
E-mailing
Setting up the e‑mail function
1
Open a web browser, and then type the printer IP address in the address field.
Notes:
•
View the printer IP address on the home screen. The IP address appears as four sets of numbers
separated by periods, such as 123.123.123.123.
•
If you are using a proxy server, then temporarily disable it to load the web page correctly.
2
Click Settings > E‑mail > E‑mail Setup.
3
Configure the settings.
4
Apply the changes.
Configuring e‑mail settings
1
Open a Web browser, and then type the printer IP address in the address field.
Notes:
•
View the printer IP address on the printer home screen. The IP address appears as four sets of
numbers separated by periods, such as 123.123.123.123.
•
If you are using a proxy server, then temporarily disable it to load the Web page correctly.
2
Click Settings > E-mail.
3
Enter the needed information.
4
Apply the changes.
Sending an e-mail
Using the control panel
1
Load an original document into the ADF tray or on the scanner glass.
2
From the control panel, navigate to:
> E-mail >
Note: You can also enter the recipient using the address book or shortcut number.
If necessary, configure the output file type settings.
3
Send the e-mail.
> enter the needed information
28