Enabling The Usb Port - Lexmark MB2338 User Manual

Troubleshooting
Action
Step 6
Check if the web proxy servers are disabled.
Are the web proxy servers disabled?
Step 7
Access the Embedded Web Server.
Did the Embedded Web Server open?

Enabling the USB port

1
From the control panel, navigate to:
> Settings >
2
Select Enable USB Port, and then press
Checking the printer connectivity
1
From the control panel, navigate to:
> Settings >
2
Select Network Setup Page, and then press
3
Check the first section of the network setup page, and confirm that the status is connected.
If the status is not connected, then the LAN drop may be inactive, or the network cable may be unplugged
or malfunctioning. Contact your administrator for assistance.
> Network/Ports >
> Reports > > Network >
Yes
Go to step 7.
The problem is
solved.
> USB >
.
.
139
No
Contact your
administrator.
Contact customer
support.