Table of Contents
Advertisement
3. In the Select Controller dialog, go to the drop down box near the top and select the PC serial
port to which the drive is connected. If you are unsure which PC serial port is connected to
the drive, select Scan all serial ports.
Click Scan to search for the MintDrive
When the search is complete, click on MintDrive
button.
Note: If the MintDrive
the PC and that the MintDrive
ports.
5-6 Operation
This check box is already selected for you. When you
click Select, it means that the Commissioning Wizard
will start automatically.
II
is not listed, check the serial lead between the MintDrive
II
.
II
in the list to select it, and click the Select
II
is powered correctly. Click Scan to re-scan the
www.baldormotion.com
II
and
MN1901
Advertisement
Table of Contents
