Table of Contents
Advertisement
Keyword
DACMONITORAXIS
DACMONITORGAIN
DACMONITORMODE
DACMONITORMODEPARAMETER
DACMONITOROFFSET
DECEL
DECELTIME
DECELTIMEMAX
DPREVENT
DRIVEBUSNOMINALVOLTS
DRIVEBUSOVERVOLTS
DRIVEBUSUNDERVOLTS
DRIVEBUSVOLTS
DRIVEENABLE
DRIVEENABLEINPUTMODE
DRIVEENABLEMODE
DRIVEENABLEOUTPUT
DRIVEENABLESWITCH
DRIVEERROR
DRIVEFEEDBACK
DRIVEID
DRIVEOKOUTPUT
DRIVEOVERLOADAREA
DRIVEOVERLOADMODE
C-6 Mint Keyword Summary
Description
To specify which axis to monitor during DAC monitoring.
To specify a multiplying factor for use during DAC
monitoring.
To specify which axis parameter to monitor during DAC
monitoring.
To specify a parameter associated with
DACMONITORMODE.
To specify an offset to add to the output when monitoring
using an auxiliary DAC channel.
To set the deceleration rate on the axis.
To set the deceleration rate on the axis.
To define the deceleration rate of an axis.
To interrupt the host PC and generate a trappable event,
using the Dual Port RAM (DPR).
To return the nominal value of the DC bus voltage for the
drive.
To set or return the overvoltage trip level for the drive.
To set or return the undervoltage trip level for the drive.
To return the current level of the DC bus.
To enable or disable the drive for the specified axis.
To control the action taken in the event of the drive being
disabled from the drive enable input/enable DIP switch.
To set the drive to auto-enable on power on.
To specify an output as a drive enable.
To read the state of the drive enable input.
To report errors on the drive or to clear current drive
errors.
To read the type of feedback module.
To define a text description for the drive.
To assign a digital output as the Drive OK output.
Reads the extent of a drive overload condition.
Sets or reads the action taken in the event of a drive
overload condition.
www.baldormotion.com
MN1901
Advertisement
Table of Contents
