Table of Contents
Advertisement
Keyword
FASTAUXENCODER
FASTAUXLATCH
FASTAUXLATCHDISTANCE
FASTAUXLATCHEDGE
FASTAUXLATCHMODE
FASTAUXSELECT
FASTENABLE
FASTENCODER
FASTLATCH
FASTLATCHEDGE
FASTLATCHMODE
FASTPOS
FASTSELECT
FEEDBACKFAULTENABLE
FEEDRATE
FEEDRATEMODE
FEEDRATEOVERRIDE
FIRMWARERELEASE
FIRMWAREVERSION
FLY
FOLERROR
C-8 Mint Keyword Summary
Description
To return the instantaneous auxiliary encoder value that
was recorded on the fast interrupt.
To read the auxiliary encoder fast interrupt latch.
To specify the distance over which further auxiliary
encoder latch edges will be ignored.
To select the capture edge for fast capture on the
auxiliary encoder.
Sets the default action to be taken to clear the auxiliary
encoder's fast position latch.
To select which of the fast position capture inputs will
capture an auxiliary encoder channel.
Manually clears the encoder's fast position latch.
To return the instantaneous encoder value that was
recorded on the fast interrupt.
To read the axis fast interrupt latch.
To define which edge polarity should cause the fast
position to be captured.
To set the default action to be taken to clear the
encoder's fast position latch.
To return the instantaneous axis position that was
recorded on the fast interrupt.
To select which of the fast position capture inputs (or
outputs) will cause axis position to be captured.
To enable or disable detection of motor feedback faults.
To set the slew speed of an individual move loaded in
the move buffer.
To control the use of slew speed, acceleration,
deceleration and feedrate override.
Overrides the current speed or feedrate being used.
To read the release number of the firmware.
To read the version number of the firmware.
To create a flying shear by following a master axis with
controlled acceleration and deceleration.
To return the instantaneous following error value.
www.baldormotion.com
MN1901
Advertisement
Table of Contents
