Preventing A Program Running At Startup - Baldor MDH1A05TB-RC23 Installation Manual

3.9.8 Preventing a program running at startup

If switches 5 and 9 are set to On and switch 8 is set to Off, any program already in the
II
MintDrive that contains an Auto command will be prevented from running automatically at
startup.
1. Remove
power.
Figure 23 - Preventing the Auto command from running a stored Mint program
3-36 Basic Installation
2.
5 On
Off 8
9 On
www.baldormotion.com
3. Reapply power. Mint program
with Auto command will not run.
MN1901