Laser Description And Safety Information - Banner Q4X Instruction Manual

(SELECT)(TEACH)
• Press to select menu items in Setup mode
• Press and hold for longer than 2 seconds to start
the currently selected TEACH mode (the default is
two-point TEACH)
(-)(MODE)
• Press to navigate the sensor menu in Setup mode
• Press to change setting values; press and hold to
decrease numeric values
• Press and hold for longer than 2 seconds to enter
Setup mode

1.4 Laser Description and Safety Information

CAUTION: Use of controls or adjustments or performance of procedures other than those specified herein may
result in hazardous radiation exposure. Do not attempt to disassemble this sensor for repair. A defective unit
must be returned to the manufacturer.
Class 1 Lasers
Class 1 lasers are lasers that are safe under reasonably foreseeable conditions of operation, including the use of optical
instruments for intrabeam viewing.
Laser wavelength: 655 nm
(+)(DISP)
•
•
•
Output: < 0.20 mW
www.bannerengineering.com - Tel: 763.544.3164
Q4X Stainless Steel Laser Sensor
Press to navigate the sensor menu in Setup mode
Press to change setting values; press and hold to
increase numeric values
Press and hold for longer than 2 seconds to switch
between light operate (LO) and dark operate (DO)
NOTE: When navigating the menu, the
menu items loop.
Pulse Duration: 7 µs to 2 ms
5