Table of Contents
Advertisement
LTF T
F
L
D
IME OF
LIGHT
ASER
ISTANCE
Enter Button
Press Enter to:
•
•
•
•
In the Sensor Menu, a checkmark
Press Enter to save changes. New values flash rapidly and the sensor returns to the parent menu.
Escape Button
Press Escape to:
•
•
IMPORTANT
In the Sensor Menu, a return arrow in the upper left corner of the display indicates that pressing Escape returns to the parent menu.
Press and hold Escape for 2 seconds to return to Run mode from any menu or remote teach.
A lock symbol displays in the upper left corner of the display to indicate when the sensor is locked.
Laser Description and Safety Information
RETURN DEFECTIVE UNITS TO THE MANUFACTURER.
Use of controls or adjustments or performance of procedures other than those specified herein may result in haz-
ardous radiation exposure.
•
Do not attempt to disassemble this sensor for repair. A defective unit must be returned to the manufacturer.
Class 2 Laser Models
NEVER STARE DIRECTLY INTO THE SENSOR LENS.
Laser light can damage your eyes.
•
Avoid placing any mirror-like object in the beam. Never use a mirror as a retroreflective target.
Reference IEC 60825-1:2007, Section 8.2.
2
S
Q
S
ENSOR
UICK
TART
Access the Sensor Menu from Run mode
Access the submenus
Move right one digit in distance based settings
Save changes
in the lower right corner of the display indicates that pressing Enter accesses a submenu.
Leave the current menu and return to the parent menu
Return to Run mode from the Quick Menu
: Pressing Escape discards any unsaved programming changes.
!
CAUTION
!
CAUTION
For Safe Laser Use - Class 2 Lasers
•
Do not stare at the laser.
•
Do not point the laser at a person's eye.
•
Mount open laser beam paths either above or below eye level, where practical.
•
Terminate the beam emitted by the laser product at the end of its useful path.
© Banner Engineering Corp. www.bannerengineering.com
G
UIDE
B
E
C
.
ANNER
NGINEERING
ORP
Advertisement
Table of Contents
