Wiring Diagram-Threaded Barrel Models; Wiring Diagram-Flush Mount Models; Cleaning And Maintenance - Banner Q4X Instruction Manual

3. Check the sensor alignment.
4. Tighten the mounting screws to secure the sensor (or the sensor and the bracket) in the aligned position.
2.4 Wiring Diagram—Threaded Barrel Models
1
3
2
Load
4
Load
5
Remote
Teach
NOTE: Open lead wires must be connected to a terminal block.
NOTE: The input wire function is user-selectable. The default for the input wire function is off (disabled).
2.5 Wiring Diagram—Flush Mount Models
NPN Models
Load
NOTE: Open lead wires must be connected to a terminal block.
NOTE: The input wire function is user-selectable. The default for the input wire function is off (disabled).

2.6 Cleaning and Maintenance

Handle the sensor with care during installation and operation. Sensor windows soiled by fingerprints, dust, water, oil, etc.
may create stray light that may degrade the peak performance of the sensor. Blow the window clear using filtered,
compressed air, then clean as necessary using water and a lint-free cloth.
+
10-30V dc
–
10-30V dc
Input Wire
www.bannerengineering.com - Tel: 763.544.3164
Q4X Stainless Steel Laser Sensor
2
3
Key
1 = Brown
2 = White
3 = Blue
4 = Black
5 = Gray
PNP Models
10–30 V dc
Load
Input Wire
1
4
5
1
2
4
3
Key
1 = Brown
2 = White
3 = Blue
4 = Black
7