Reset To Factory Defaults Using The Remote Input; Locking And Unlocking The Sensor Buttons - Banner Q4X Instruction Manual

2. Select the desired TEACH mode.
Action
Pulses
T
1
T
2
T
T
3
T
T
4
T
T T
5
T

3.4.2 Reset to Factory Defaults Using the Remote Input

Eight-pulse the remote input to apply the factory defaults and return to Run mode.
T T T T T
T T T T
NOTE: The input wire function remains at remote teach input (

3.5 Locking and Unlocking the Sensor Buttons

Use the lock and unlock feature to prevent unauthorized or accidental programming changes. Three settings are available:
• —The sensor is unlocked and all settings can be modified (default).
• — The sensor is locked and no changes can be made.
• —The switch point value can be changed by teaching or manual adjustment, but no sensor settings can be
changed through the menu.
When in mode,
(+)(DISP) or (-)(MODE) are pressed, but
When in mode,
adjust options, briefly press and release (+)(DISP) or (-)(MODE). To enter TEACH mode, press the (SELECT)(TEACH)
button and hold for longer than 2 seconds.
Button Instructions
To enter mode, hold
Holding and pressing
Remote Input Instructions
1. Access the remote input.
TEACH Mode
Two-point static background
suppression
T
Dynamic background suppression
T T
One-point window (foreground
suppression)
T
T T T
One-point background suppression
T T
T T
T
Dual (intensity + distance)
T T T
T T T
T T T
displays when the (SELECT)(TEACH) button is pressed. The switch point displays when
displays if the buttons are pressed and held.
displays when (+)(DISP) or (-)(MODE) are pressed and held. To access the manual
and press four times. To enter
four times unlocks the sensor from either lock mode and the sensor displays
www.bannerengineering.com - Tel: 763.544.3164
Q4X Stainless Steel Laser Sensor
Result
The selected TEACH method displays for a
few seconds and the sensor returns to Run
mode.
).
mode, hold and press seven times.
.
15