Abbreviations - Banner Q4X Instruction Manual

Q4X Stainless Steel Laser Sensor
PROBLEM:
The object is close to the reference surface
PROBLEM:
The sensor is far from the object

5.4 Abbreviations

The following table describes the abbreviations used on the sensor display and in this manual.
Abbreviation Description
No valid signal in range
The sensor has not been taught
One-shot
First
Second
Two-point TEACH (static background suppression)
One-point background suppression
Button
Cancel
Display read
Output timing delay
Delay
Delay timer for one-shot
Dynamic background suppression
End—exit the sensor menu
32
Figure 23. Common problems and solutions for detecting clear objects
www.bannerengineering.com - Tel: 763.544.3164
SOLUTION:
Move the target closer to the sensor
SOLUTION:
Move the sensor closer to the target