Warning; International Electrical Symbols - AEMC SL261 User Manual

AC/DC Current Oscilloscope Probe Model SL261
These safety warnings are provided to ensure the safety of
personnel and proper operation of the instrument.
• Connect the probe to the oscilloscope or voltage measuring
instrument before clamping the probe around a conductor.
• Never use the probe on circuits rated higher than 600V or
with float voltage greater than 600V.
• Never leave the probe clamped around a conductor while it
is not connected to an oscilloscope or voltage measuring
instrument.
• Carefully center the conductor inside the probe jaws and
ascertain that the probe is perpendicular to the conductor
before closing the jaws.
• Avoid, if possible, the proximity of other conductors which
may create noise.
• Check the magnetic mating surfaces of the probe jaws;
these should be free of dirt, rust, or other foreign matter.
• Do not use a probe which is cracked, damaged, or has
defective leads.

International Electrical Symbols

This symbol signifies that the probes are protected by double or
reinforced insulation. Use only specified replacement parts when
servicing the instrument.
This symbol signifies CAUTION! and requests that the user refer
to the user manual before using the instrument.

Warning

- 2 -