Configuration - GE IC695PNC001 User Manual

Chapter

Configuration

3
This chapter explains how to configure an RX3i PROFINET Controller and its I/O devices in a
PACSystems RX3i controller system. Additional information about RX3i configuration is available in
other PACSystems documentation and in the Logic Developer online help.
This chapter discusses the following topics:
▪
Configuration Overview
o
Basic Configuration Steps
▪
Configuration Tools
▪
Configuring an RX3i PNC
The PNC's LAN
o
o
Configuring PNC Parameters
▪
Configuring PROFINET LANs
o
Configuring the LAN Properties
▪
Adding a VersaMax PROFINET Scanner to a LAN
o
Configuring VersaMax PNS Parameters
o
Adding VersaMax PNS Power Supplies
o
Adding VersaMax Modules to a Remote Node
o
Adding Power Supplies Between Modules
o
Configuring VersaMax Module Parameters
o
Configuring Analog Modules that have Jumpers
▪
Adding a Third-Party IO-Device to a LAN
o
Editing Third-Party IO-Device Parameters
o
Configuring Sub-modules of an IO-Device
▪
Viewing / Editing IO-Device Properties
▪
Assigning IO-Device Names
▪
Configuring IO-Devices
▪
After the Configuration is Stored to the RX3i CPU
o
Clearing the RX3i Controller Configuration
GFK-2571A 3-1